> ## Content Index
> Fetch the complete content index at: https://www.geekyinc.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# Day 3 of Geekmas - Wolverine Claws
- URL: https://www.geekyinc.com/geekmas-day-3-wolverine-claws/
- Published: 2023-12-17T03:04:40.000Z
- Updated: 2023-12-17T03:04:40.000Z
- Description: On the 3rd day of Geekmas, my geek friend gave to me a set of Wolverine's claws.
- Author: Devon Lambert
- Tags: 3D Printing, Geekmas, gaming, Comics

On the 3rd day of Geekmas, I printed these Wolverine Claws. I admit, the post processing here was rushed, and could have definitely been better but again, I was against the clock and wanted to show the result. It's not a challenging print, but I did lose a few of the claws post printing due to the holder piece snapping off. My recommendation would be to use supports in the handle area and try using a stronger material, like a PLA tough OR even PETG.   
  
You can see the rush job over on TikTok:

> [@geekyinc](https://www.tiktok.com/@geekyinc?refer=embed&ref=geekyinc.com "@geekyinc") 
> 
> On Day 3 of Geekmas I made Wolverine's claws! [#geekmas](https://www.tiktok.com/tag/geekmas?refer=embed&ref=geekyinc.com "geekmas") [#geekyinc](https://www.tiktok.com/tag/geekyinc?refer=embed&ref=geekyinc.com "geekyinc") [#geek](https://www.tiktok.com/tag/geek?refer=embed&ref=geekyinc.com "geek") [#geekculture](https://www.tiktok.com/tag/geekculture?refer=embed&ref=geekyinc.com "geekculture") [#wolverine](https://www.tiktok.com/tag/wolverine?refer=embed&ref=geekyinc.com "wolverine") [#xmen](https://www.tiktok.com/tag/xmen?refer=embed&ref=geekyinc.com "xmen") [#cosplay](https://www.tiktok.com/tag/cosplay?refer=embed&ref=geekyinc.com "cosplay") [#halloween](https://www.tiktok.com/tag/halloween?refer=embed&ref=geekyinc.com "halloween") 
> 
> [♬ original sound - geekyinc](https://www.tiktok.com/music/original-sound-7313391910430362414?refer=embed&ref=geekyinc.com "♬ original sound - geekyinc") 

## The breakdown:

💡

***Geeky Inc Category** \- Gaming and Comics  
***Original Appearance** \- Incredible Hulk #180  
***Time to Print** (on a Bambu P1P) - 4 hours  
***Post Processing** \- Semi - Moderate  
***Link to STL** \- [https://www.printables.com/model/319278-wolverine-claws-for-cosplay](https://www.printables.com/model/319278-wolverine-claws-for-cosplay?ref=geekyinc.com)